Yaesu FTM-100D 144/430mhz Dual Band Transceiver good condition works great

Description

Yaesu FTM-100D 144/430mhz Dual Band Transceiver good condition works great. With separation kit and data cable. I don't have original manual, but the nifty mini-manual
Dual-band C4FM / FM mobile transceiver with automatic-mode select. 50 Watts of RF power on both the 144 and 430 MHz amateur radio bands. Wide band receive, digital group monitor function, receives and forwards digital image data, APRS and WIRES-X functions, 1000 memory channels, built-in GPS antenna, micro-SD card slot. Ideated in Japan, year of introduction 2010.
Reference market :
amateur-radio
FTM-100D specifications
General
Frequency coverage
Receive
108.0000 ~ 999.9900 MHz
[1]
Transmit
144.0000 ~ 146.0000 MHz
[2]
144.0000 ~ 148.0000 MHz
430.0000 ~ 440.0000 MHz
[2]
430.0000 ~ 450.0000 MHz
Mode
FSK
[3]
/ AM / FM / C4FM
Tuning step
5 / 6.25 / 8.333
[4]
/ 10 / 12.5 / 15 / 20 / 25 / 50 / 100 KHz
Receiver
Sensitivity
AM
0.8 uV (108~137 MHz, 10dB S/N)
0.8 uV (300~336 MHz, 10dB S/N)
FM
0.2 uV (137~150 MHz, 12dB SINAD)
0.25 uV (150~174 MHz, 12dB SINAD)
0.3 uV (174~222 MHz, 12dB SINAD)
0.25 uV (222~300 MHz, 12dB SINAD)
0.25 uV (336~420 MHz, 12dB SINAD)
0.2 uV (420~520 MHz, 12dB SINAD)
0.4 uV (800~900 MHz, 12dB SINAD)
0.8 uV (900~1000 MHz, 12dB SINAD)
C4FM
0.19 uV (140~150 MHz, BER 1%)
0.19 uV (420~470 MHz, BER 1%)
Selectivity
AM / FM
12 KHz (-6dB)
30 KHz (-60dB)
Frequency stability
± 2.5 ppm max with temperature from -20°C to +60°C
IF (Intermediate Frequency)
1°
47.25 MHz
2°
450 KHz
Transmitter
Output power
FM
5 / 20 / 50 W
C4FM
5 / 20 / 50 W
Spurious emission
<-60 dB
Maximum deviation (FM)
± 5.0 KHz (wide)
± 2.5 KHz (narrow)
Microphone
2kΩ
10kΩ (data terminal input)
Features
Memory
500 regular memories for band A.
500 regular memories for band B.
40? pair for scan limits.
2 home channels.
10 pre-programmed "weather broadcast" channels.
Display
160 x 40px LCD
1 kHz frequency resolution
45-segments signal meter bar
Selective calling
CTCSS / DCS / DTMF / 1750 Hz tone
Antenna
SO239 50Ω
Power supply
13.8 VDC nominal (negative ground).
11.7 ~ 15.8 VDC operating.
Power consumption
500mA RX, typ
11A TX, 50W on 144 MHz
12A TX, 50W on 430 MHz
Audio power
3 W on 8Ω
8 W on 4Ω
[5]
Audio output
Jack external speaker
Connections
10-pin DIN (DATA / PC / I/O unit)
Mechanical and environmental data
Operating temperature
from -20°C to +60°C
Dimensions
Front panel
140 (W) x 45 (H) x 29 (D) mm without knobs
Radio unit
140 (W) x 45 (H) x 164 (D) mm without knobs, fan, connectors
Weight
1.1kg
USA cellular blocked.
EUR version.
For Automatic Packet Reporting System (APRS) function.
VHF Airband only.
With optional MLS-200-M10 waterproof external speaker.
FTM-100D series :
The
FTM-100DR
transceiver is the USA version, with cellular band blocked. The
FTM-100DE
transceiver is the EUR version, without frequencies blocked.
FTM-100D APRS function :
APRS (Automatic Packet Reporting System) is a packet communication protocol on amateur radios that is advocated by Bob Bruninga (WB4APR). The APRS function of this radio is a data communication system for messages and position data using the APRS format. A partner amateur radio station using a GPS receiver can send an APRS message including GPS position information of the partner station.
Yaesu FTM-100D APRS function
Upon receiving an APRS signal from another station, information such as the direction and distance to that station from your station; the speed of the station; the identity and other information may be displayed on the screen of your FTM-100 transceiver.