Upgraded PORTAPACK H2+HACKRFONE SDR Radio Mayhem Firmware+Antenna 3.2" Touch USB

Description

Feature：
The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party '
Mayhem
' firmware is really what you'll want to use with it since it contains many more decoders and transmit options.
SPECIFICATIONS:
3.2inch 240 x 320 RGB LCD with resistive touch panel.
Four-way arrow keys, rotary jog wheel, and select button.
Coin battery for preserving settings and date/time.
Micro memory card slot for data and code storage.
Some features demonstrated in 2016 February 22 firmware video:
SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.
Wideband (18MHz) spectrum analysis and waterfall.
Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).
HackRF mode runs HackRF firmware for use with host computer SDR software.
PPM calibration for more accurate tuning.
Sleep mode saves power by turning off just the display.
You may also find the
Mayhem
firmware very interesting!
Some assembly is required.
Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into "HackRF Mode".
PortaPack is compatible only with the HackRFOne. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.
PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.
The PortaPack and HackRFOne will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive.
MAYHEM FEATURES INCLUDED:
IQ file replay
Microphone FM transmit with CTCSS.
CTCSS decoder
Frequency manager (save & load from memory card, with categories and notes).
File manager
"Soundboard" wave file player (put 8-bit mono files in memory card /wav directory).
ADS-B receiver with map view.
SSTV transmitter
Fully configurable transmit signals.
POCSAG transmitter
POCSAG receiver/decoder
Morse transmitter (FM tone and CW)
OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, ...).
RDS (Radio Data System) PSN, RadioText and Time groups transmitter.
Meteorological radiosonde receiver for M10 and M2K2...
AFSK receiver
AFSK transmitter (Bell202...)
Nuoptix DTMF sync transmitter
TouchTunes jukebox universal remote
LCR (Language de Commande Routier) message generator.
Street lighting control transmitter (CCIR tones)
"Play Dead" in case of emergency
Fully configurable RF signal generator
RSSI audio output as pitch (for direction finding).
Progress of Work:
1. It has completed the program validation prototype.
2. The latest documents in 2017, May are based on improvements.
Catching and Replay:
- One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy.
- To create a catching. You just need to enter the "Catching" menu, set the frequency of the remote key, press the red 'R' Record button and then press the key on the remote.
- Then stop the recording to save it to a SD Card.
- Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key.
Microphone TX:
- Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio
jack simply hold down the right button to push to talk.
- If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones
Other Transmitters:
-There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches.
- There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage!
Receivers:
By connecting speakers to the Portapack's 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the
PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft.
Package list:
1x Portapack, with 3.2inch touch LCD(
Mayhem
Firmware Preinstalled)
1x HackRFone
5x Antenna
1x USB cable